We offer a comprehensive range of virgin and processed polyethylene resins under strict international quality controls. Optimal solutions in density, flexibility, and molecular strength for industrial blow molding, extrusion, and injection molding.
GLOBAL SUPPLY OF POLYETHYLENE (PE)
.png)
Higher tensile, impact, and puncture resistance than conventional LDPE. Highly stretchable.
-
Extrusion
-
Blown Film: Used to produce trash bags, stretch film, food packaging, and bubble wrap.
-
Cast Film: Creates high-clarity and high-gloss films through rapid cooling on chill rolls.
-
Tubes and Hoses: Enables the manufacturing of flexible hoses for irrigation and low-pressure fluid conduction.
-
-
Injection Molding
-
Applied in the manufacturing of caps, flexible containers, toys, and components for industrial brushes or bristles.
-
-
Rotational Molding (Rotomolding)
-
Used for tanks, large containers, and buoys.
-
LINEAR LOW-DENSITY POLYETHYLENE (LLDPE)
Extraordinary flexibility, high optical clarity, and ease of processing.
-
Extrusion
-
Film Blowing: Enables the manufacturing of clear plastic rolls, grocery bags, and stretch wraps.
-
Tubes and Profiles: Creates flexible hoses or low-pressure irrigation conduits.
-
Cable Coating: Used to insulate electrical wires due to the material's flexibility and dielectric properties.
-
-
Injection Molding
-
Used to manufacture complex-shaped parts, flexible caps, toys, small containers, and household items.
-
-
Blow Molding
-
Employed in the production of squeeze bottles, flexible jars, and hollow toys.
-
-
Rotomolding
-
Used to create large-scale hollow parts, such as tanks, buoys, or large containers.
-
LOW-DENSITY POLYETHYLENE (LDPE)
Optimal balance between the flexibility of LDPE and the rigidity of HDPE. Excellent Environmental Stress Cracking Resistance (ESCR).
-
Extrusion
-
Manufacturing of pipes for gas and water distribution, conduits, and packaging films.
-
-
Blow Molding
-
Creation of hollow vessels, small tanks, and chemical containers.
-
-
Injection Molding
-
Production of pipe fittings, joints, valves, and threaded caps.
-
-
Rotomolding
-
Manufacturing of large-scale hollow parts such as storage tanks, kayaks, and playground equipment.
-
-
Compression Molding
-
Precise dosing of material into heated molds under direct mechanical pressure.
-
MEDIUM-DENSITY POLYETHYLENE (MDPE)
High stiffness, excellent tensile strength, and superior chemical resistance. Applications: High-pressure piping, blow-molded containers, plastic pallets, and geogrids.
-
Extrusion
-
Melts the resin and pushes it through a continuous die.
-
Creates tubes, pressure pipes, hoses, profiles, cables, and sheets.
-
Uses medium and high molecular weight grades with low melt flow.
-
-
Blow Molding
-
Inflates a hollow plastic tube (parison) inside a closed mold using compressed air.
-
Manufactures bottles, jerricans, fuel tanks, and containers for milk or detergent.
-
Employs medium molecular weight resins with good melt strength.
-
-
Injection Molding
-
Injects molten plastic at high pressure into a closed metal mold.
-
Produces caps, pails, crates, toys, chairs, and automotive parts.
-
Utilizes high melt flow grades to fill complex molds rapidly.
-
-
Rotomolding
-
Rotates a closed mold containing polyethylene powder while heating it in an oven.
-
Forms large, seamless, single-piece hollow parts, water tanks, containers, and buoys.
-
Requires pulverized HDPE with excellent thermal stability and uniform flow.
-
-
Thermoforming
-
Heats an extruded HDPE sheet until softened and shapes it to the mold using vacuum or pressure.
-
Generates food trays, liners, and industrial packaging.
-